Weather Stations

Executive Weather Station Display with Sensors

The Executive Weather Station (EWS) is Instromet's flagship model with a massive 687mm x 342mm display panel. This unit houses the same functionality as our "Plus" system but in a much larger display for both better visability at range and to make an excellent show piece. This model was primarily produced for educational centres, and several are in use in schools and colleges across the UK. This Unit has also been incorporated by the Gas industry at one of their main UK terminals and their adjoining terminal on the continent. We also know of a couple of units which have been installed within stately homes in the UK, as an excellent centre piece in their grand entrance halls. As with all the Climatica range the "EWS" can also be linked to our "Datalogger" to allow for data recording and Internet viewing of online data. The "EWS" really does make an excellent choice for a show piece unit or applications where the weather needs to be seen at a glance.

UK Part Numbers:

  • 352 0600 001 MPH/Knots/Beaufort

Non UK Part Numbers:

  • 352 0600 011 MPH/Knots/Beaufort

Executive Weather Station

Technical Specification

Display:

  • Wind Speed: (MPH). Analogue pointer with gust indicator calibrated scale 0 - 90 mph, 0 - 80 knots and 1 - 12 Beaufort scale, accuracy ±5%.
  • Wind Direction: Analogue 8 point scale, subdivided in to 30° points,electronically damped, accuracy ±10° Resolution >10°, Threshold 3 Knots, 3.5MPH - damping delay 2-3 seconds.
  • Gust speed: Resetable pointer for maximum readings.
  • Temperature: Liquid Crystal Display (LCD) scale in °C or °F selectable by push-button on display front. Range: -40°C to + 50°C (-40°F to + 120°F) resolution 0.1°C.
  • Rainfall Sensor: Typical accuracy ±5% (5mL water = 1mm rainfall)
  • Wet and Dry Bulb: (Auxilary Temperature) LCD readout with Humidity sensor and Radiation Screen, Dew Point and relative Humidity calculated from tables provided.
  • Sunshine Duration: LCD digital readout in 0.01 hour increments
  • Display case: 687mm Wide x 342mm high x 70mm deep.
  • Material: Sapele wood. Hinged brass bezel surround, with PETG front panel.
  • Finish: Dark stain with acid acrylic lacquer.
  • Scales: Black on white background.
  • Sensors: Basic wind speed and direction for mast mounting 30 - 50mm diameter rain fall, sunshine and wet & dry (humidity) sensors.
  • Cables: 5m Display cable, all sensor come supplied with 25m as standard.
  • Junction box with internal power supply unit - supplied.
    Mounting kits available:
    Mast 480 1000 094 Short (1 metre)
    Mast 480 1000 096 Long (2 metres)
    Tile and Wall 480 1000 097